-
Out of stock
The SMC 90 Spline Seed Drill is designed to be paired with the STONY 90 Soil preparer. It allows you to sow with precision immediately after preparing the soil. You will be able to bury the stones, prepare the soil and sow in a single pass. A real time saver! -
Out of stock
The SMA 250 pneumatic seed drill is designed to be paired with the RX 250 soil preparer. It allows sowing immediately after soil preparation. This allows to make one single pass to bury the stones, prepare the ground and sow. A real time saver! -
Out of stock
The SMA 300 pneumatic seed drill is designed to be paired with the RX 300 soil preparer. It allows sowing immediately after soil preparation. This allows to make one single pass to bury the stones, prepare the ground and sow. A real time saver!
-
Out of stock
Seeder for tractor This seeder has been designed to seed most varieties of turf such as pastures, fescues, ryegrass, etc. on large surfaces. It is equipped with a pneumatic seeder and two cast iron rollers, allowing seeding in one pass. It is used on land previously worked with a soil preparation/stone burier.- Oscillating rear roller
- Locking of the oscillation of the rear roller for road travel
- Drive wheel allowing the deposit of the seed in proportion to the advance
- Access platform for the tank
- Scraper on the front and rear roller
- Pneumatic seeder
- Available in double rear cast iron rollers
-
Out of stock
Seeding machine for tractors This seeding machine was designed to sow most varieties of grass such as pastures, red fescue, ray-grass, etc. on large areas. It is equipped with a gravity seed drill and two cast iron rollers, allowing a single clutch passage. It is used on the ground previously worked with the aid of a soil preparer/stone burier.- Cast iron double roller crenellated discs
- Wheel Eraser Claws
- Swing rear roller
- Quick opening/closing system by guillotine, without flow change
- Front and rear roller scraper
- Seed flow adjustment
- Stainless steel gravity seeder
-
Out of stock
Seeding machine for tractors This seeding machine was designed to sow most varieties of grass such as pastures, red fescue, ray-grass, etc. on large areas. It is equipped with a gravity seed drill and two cast iron rollers, allowing a single clutch passage. It is used on the ground previously worked with the aid of a soil preparer/stone burier.
- Cast iron double roller crenellated discs
- Wheel Eraser Claws
- Swing rear roller
- Quick opening/closing system by guillotine, without flow change
- Front and rear roller scraper
- Seed flow adjustment
- Stainless steel gravity seeder
-
Out of stock
Stone buriers for Skid-Steer (mini- loader) This soil and stone burier is designed for Skid-Steer (mini-loader). There are three versions of the machine hitch:- Toro / Ditch Witch / Vermeer type hitch plate: STH 36
- Bobcat type hitch plate: STH 36 B
- Adaptable to your carrier by your own : supplied without hitch plate, without hoses, without couplers: STH 36 ADAPT
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Conventional quick hook system
- Grader blade
- Fast coupling / uncoupling device
- Rear mesh roller side adjustment device by cylinder
- TurfRenov® Kit
- Kit control TurfRenov®
- Gravity Grass Seeder : SG 90
-
Out of stock
Stone buriers for Skid-Steer (mini- loader) This soil and stone burier is designed for Skid-Steer (mini-loader). There are two versions of the machine hitch :- Toro / Ditch Witch / Vermeer type hitch plate: STH 42
- Bobcat type hitch plate : STH 42 B
- Adaptable to your carrier by your own : supplied without hitch plate, without hoses, without couplers: STH 42 ADAPT
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Conventional quick hook system
- Grader blade
- Fast coupling / uncoupling device
- Rear mesh roller side adjustment device by cylinder
- TurfRenov® Kit
- Kit control TurfRenov®
- Gravity Grass Seeder : SG 100
-
Out of stock
Stone burier for tiller This soil preparer and stone burier is thought for cultivators. This machine has been designed to perform tilling to 140 mm, burying pebbles/litter/grass, levelling with adjustable levelling blade, rolling with metal mesh roller. The use is made in direct or on a ground previously decompacted in depth and cleared of large stones.- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Oil bath torque limiter at rotor end
- Working depth adjustment
- Adaptable on: RAPID/REFORM, NIBBI, AGRIA, AEBI (other brands, contact us)
- Storage stand
- Grader blade
- Working depth adjustment by hydraulic jack
-
Out of stock
Stone Burier for Micro-Tractor This soil preparer and stone burier is designed for micro-tractors. It allows the building or renovation of green spaces by preparing the seed bed before seeding. The machine is multi-purpose, it allows tilling, burying (stones, rubbish, herbs, etc.), levelling, mixing and rolling the surface. The use is done live or on a ground previously decompacted in depth and cleared of large stones.- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Oil bath torque limiter at rotor end
- Grader blade
- Rear mesh roller side adjustment device by cylinder
- Stainless Steel Splice Seeder: SMC 100
- Gravity Grass Seeder : SG 100
-
Out of stock
Stone Burier for Micro-Tractor This soil preparer and stone burier is designed for micro-tractors. It allows the building or renovation of green spaces by preparing the seed bed before seeding. The machine is multi-purpose, it allows tilling, burying (stones, rubbish, herbs, etc.), levelling, mixing and rolling the surface. The use is done live or on a ground previously decompacted in depth and cleared of large stones.
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Oil bath torque limiter at rotor end
- Grader blade
- Rear mesh roller side adjustment device by cylinder
- Stainless Steel Splice Seeder: SMC 90
- Gravity Grass Seeder : SG 90
-
Out of stock
The ARS anti-furrow system allows a perfect levelling of the ground after the pass of the chaincase. This option is compatible with the stone buriers RX 250, RX 250 L-3, RX 300 and RX 370.
Une question ? +33(0)2 43 422 422